Submit a 3D Printing Request

Please allow 24–48 hours for your 3D print request to be reviewed and approved.

Because the balance for 3D printed objects is added to your library account, requests for 3D objects weighing more than 249 grams (more than $24.99 in value) will inadvertently block your library account and prohibit you from making Document Delivery Requests. Please contact the Main Desk by phone at (928) 523-2173 or by email at for more information.

Upload your 3D design/model:
Allowed file types: .stl

Object Size:  

Objects designed in inches need to be converted to millimeters.

Max is 457mm

Max is 305mm

Max is 300mm

Colors are subject to availability.
If no color is specified, request will be printed in color loaded in available printers.

If print settings for 3D model differ from MakerBot's standard print settings, please specify here:

Unless specified otherwise above, all 3D print requests will be printed at MakerBot's standard print settings (10% infill, 200 micron/0.20mm resolution/layer height, 2 shells, with raft).
Please see the Standard quality settings in MakerBotDesktop.

Tell us your story:

Is this an original design?
Is this for a class?

Payment and turnaround time:

Use Agreement:

Notice concerning copyright and other intellectual property restrictions

The copyright law of the United States (Title 17, United States Code) governs the making of photocopies or other reproductions of copyrighted material.

Under certain conditions specified in the law, libraries and archives are authorized to furnish a photocopy or other reproduction. One of these specific conditions is that the photocopy or reproduction is not to be "used for any purpose other than private study, scholarship, or research." If a user makes a request for, or later uses, a photocopy or reproduction for purposes in excess of "fair use," that user may be liable for copyright infringement.

This institution reserves the right to refuse to accept a copying order/scanning services if, in its judgment, fulfillment of the order would involve violation of copyright or other intellectual property laws.

By submitting this print request, I acknowledge, represent and warrant as follows:

  • I have read, understand, and will comply with the copyright notice posted above.
  • This request complies with the Cline Library MakerLab Use Policy and all other applicable laws, regulations, and policies.
  • I will use the printed object(s) only for personal use, private study, scholarship, or research.
  • I will not use them for any commercial purpose or allow any third party to do so.

Note: if you get a 500 error after submitting your job, please try again in another browser.
Microsoft Edge is currently not supported at NAU.


Questions?  Send a message via Ask Us! or call 928-523-2173.